This unit tests ground fault receptacles for up to seven conditions. A succession of yellow and red lights provides indications of circuit status or specifies wiring error. The tester trips GFCI between 6-9 MA by overloading the circuit and tripping GFCI. Easy to use.
- Succession of yellow and red lights provide indication of circuit status or specifies wiring errors
- Tester trips between 6-9 mA
- Compact and easy to use
- Tests for 7 conditions: ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring
Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.
Gardner Bender's GUSB-3450 USB multimeter is used to confirm USB port voltage and current and check chargers, cables and USB ports. The tester features a high-impact housing and a pocket clip. Measure current draw, measure performance of solar USB chargers and test for proper wiring and polarity. The easy to understand display alternates between volts and amps
The Sperry Instruments DSA600TRMS true RMS clamp meter has more features and functions without the extra cost. This clamp meter offers a large range of superior functions like advanced temperature measurements and peak hold. The meter gives true RMS readings and measures current without having to contact live conductors. This unit features a data hold switch to maintain the reading on the 5999 count backlit screen and auto power-off functionality to extend battery life. The built-in low battery indicator will ensure you won't get incorrect readings due to low batteries. Audible beeper offers easy continuity check (Buzzer sounds at 100 Ohms or less). We consider safety first, this instrument has been designed and tested according to cETLus standards and is CAT 3 600 V rated. This compact, lightweight, yet durable unit has a crush rating of 250 lb and a 10 ft drop rating the best in the industry.
Compact, tests AC/DC voltage to 300 volt, DC current to 250mA, resistance to 1 M ohm, decibels from -20 to +56dB. Diode protected. With fuse overload protection circuitry. 250 mA fuse. Includes safety test leads and instruction manual.
GB Smart Multi Meter, Measuring Functions: AC Voltage, Continuity, DC Voltage, Diode Test, Resistance, Display Type: Digital, Power Source: Battery, ABS, Yellow, Dimensions: 7 in L